+
−#!/bin/sh
+
−# install - install a program, script, or datafile
+
−
+
−scriptversion=2005-05-14.22
+
−
+
−# This originates from X11R5 (mit/util/scripts/install.sh), which was
+
−# later released in X11R6 (xc/config/util/install.sh) with the
+
−# following copyright and license.
+
−#
+
−# Copyright (C) 1994 X Consortium
+
−#
+
−# Permission is hereby granted, free of charge, to any person obtaining a copy
+
−# of this software and associated documentation files (the "Software"), to
+
−# deal in the Software without restriction, including without limitation the
+
−# rights to use, copy, modify, merge, publish, distribute, sublicense, and/or
+
−# sell copies of the Software, and to permit persons to whom the Software is
+
−# furnished to do so, subject to the following conditions:
+
−#
+
−# The above copyright notice and this permission notice shall be included in
+
−# all copies or substantial portions of the Software.
+
−#
+
−# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+
−# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+
−# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL THE
+
−# X CONSORTIUM BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN
+
−# AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNEC-
+
−# TION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
+
−#
+
−# Except as contained in this notice, the name of the X Consortium shall not
+
−# be used in advertising or otherwise to promote the sale, use or other deal-
+
−# ings in this Software without prior written authorization from the X Consor-
+
−# tium.
+
−#
+
−#
+
−# FSF changes to this file are in the public domain.
+
−#
+
−# Calling this script install-sh is preferred over install.sh, to prevent
+
−# `make' implicit rules from creating a file called install from it
+
−# when there is no Makefile.
+
−#
+
−# This script is compatible with the BSD install script, but was written
+
−# from scratch.  It can only install one file at a time, a restriction
+
−# shared with many OS's install programs.
+
−
+
−# set DOITPROG to echo to test this script
+
−
+
−# Don't use :- since 4.3BSD and earlier shells don't like it.
+
−doit="${DOITPROG-}"
+
−
+
−# put in absolute paths if you don't have them in your path; or use env. vars.
+
−
+
−mvprog="${MVPROG-mv}"
+
−cpprog="${CPPROG-cp}"
+
−chmodprog="${CHMODPROG-chmod}"
+
−chownprog="${CHOWNPROG-chown}"
+
−chgrpprog="${CHGRPPROG-chgrp}"
+
−stripprog="${STRIPPROG-strip}"
+
−rmprog="${RMPROG-rm}"
+
−mkdirprog="${MKDIRPROG-mkdir}"
+
−
+
−chmodcmd="$chmodprog 0755"
+
−chowncmd=
+
−chgrpcmd=
+
−stripcmd=
+
−rmcmd="$rmprog -f"
+
−mvcmd="$mvprog"
+
−src=
+
−dst=
+
−dir_arg=
+
−dstarg=
+
−no_target_directory=
+
−
+
−usage="Usage: $0 [OPTION]... [-T] SRCFILE DSTFILE
+
−   or: $0 [OPTION]... SRCFILES... DIRECTORY
+
−   or: $0 [OPTION]... -t DIRECTORY SRCFILES...
+
−   or: $0 [OPTION]... -d DIRECTORIES...
+
−
+
−In the 1st form, copy SRCFILE to DSTFILE.
+
−In the 2nd and 3rd, copy all SRCFILES to DIRECTORY.
+
−In the 4th, create DIRECTORIES.
+
−
+
−Options:
+
−-c         (ignored)
+
−-d         create directories instead of installing files.
+
−-g GROUP   $chgrpprog installed files to GROUP.
+
−-m MODE    $chmodprog installed files to MODE.
+
−-o USER    $chownprog installed files to USER.
+
−-s         $stripprog installed files.
+
−-t DIRECTORY  install into DIRECTORY.
+
−-T         report an error if DSTFILE is a directory.
+
−--help     display this help and exit.
+
−--version  display version info and exit.
+
−
+
−Environment variables override the default commands:
+
−  CHGRPPROG CHMODPROG CHOWNPROG CPPROG MKDIRPROG MVPROG RMPROG STRIPPROG
+
−"
+
−
+
−while test -n "$1"; do
+
−  case $1 in
+
−    -c) shift
+
−        continue;;
+
−
+
−    -d) dir_arg=true
+
−        shift
+
−        continue;;
+
−
+
−    -g) chgrpcmd="$chgrpprog $2"
+
−        shift
+
−        shift
+
−        continue;;
+
−
+
−    --help) echo "$usage"; exit $?;;
+
−
+
−    -m) chmodcmd="$chmodprog $2"
+
−        shift
+
−        shift
+
−        continue;;
+
−
+
−    -o) chowncmd="$chownprog $2"
+
−        shift
+
−        shift
+
−        continue;;
+
−
+
−    -s) stripcmd=$stripprog
+
−        shift
+
−        continue;;
+
−
+
−    -t) dstarg=$2
+
−	shift
+
−	shift
+
−	continue;;
+
−
+
−    -T) no_target_directory=true
+
−	shift
+
−	continue;;
+
−
+
−    --version) echo "$0 $scriptversion"; exit $?;;
+
−
+
−    *)  # When -d is used, all remaining arguments are directories to create.
+
−	# When -t is used, the destination is already specified.
+
−	test -n "$dir_arg$dstarg" && break
+
−        # Otherwise, the last argument is the destination.  Remove it from $@.
+
−	for arg
+
−	do
+
−          if test -n "$dstarg"; then
+
−	    # $@ is not empty: it contains at least $arg.
+
−	    set fnord "$@" "$dstarg"
+
−	    shift # fnord
+
−	  fi
+
−	  shift # arg
+
−	  dstarg=$arg
+
−	done
+
−	break;;
+
−  esac
+
−done
+
−
+
−if test -z "$1"; then
+
−  if test -z "$dir_arg"; then
+
−    echo "$0: no input file specified." >&2
+
−    exit 1
+
−  fi
+
−  # It's OK to call `install-sh -d' without argument.
+
−  # This can happen when creating conditional directories.
+
−  exit 0
+
−fi
+
−
+
−for src
+
−do
+
−  # Protect names starting with `-'.
+
−  case $src in
+
−    -*) src=./$src ;;
+
−  esac
+
−
+
−  if test -n "$dir_arg"; then
+
−    dst=$src
+
−    src=
+
−
+
−    if test -d "$dst"; then
+
−      mkdircmd=:
+
−      chmodcmd=
+
−    else
+
−      mkdircmd=$mkdirprog
+
−    fi
+
−  else
+
−    # Waiting for this to be detected by the "$cpprog $src $dsttmp" command
+
−    # might cause directories to be created, which would be especially bad
+
−    # if $src (and thus $dsttmp) contains '*'.
+
−    if test ! -f "$src" && test ! -d "$src"; then
+
−      echo "$0: $src does not exist." >&2
+
−      exit 1
+
−    fi
+
−
+
−    if test -z "$dstarg"; then
+
−      echo "$0: no destination specified." >&2
+
−      exit 1
+
−    fi
+
−
+
−    dst=$dstarg
+
−    # Protect names starting with `-'.
+
−    case $dst in
+
−      -*) dst=./$dst ;;
+
−    esac
+
−
+
−    # If destination is a directory, append the input filename; won't work
+
−    # if double slashes aren't ignored.
+
−    if test -d "$dst"; then
+
−      if test -n "$no_target_directory"; then
+
−	echo "$0: $dstarg: Is a directory" >&2
+
−	exit 1
+
−      fi
+
−      dst=$dst/`basename "$src"`
+
−    fi
+
−  fi
+
−
+
−  # This sed command emulates the dirname command.
+
−  dstdir=`echo "$dst" | sed -e 's,/*$,,;s,[^/]*$,,;s,/*$,,;s,^$,.,'`
+
−
+
−  # Make sure that the destination directory exists.
+
−
+
−  # Skip lots of stat calls in the usual case.
+
−  if test ! -d "$dstdir"; then
+
−    defaultIFS='
+
−	 '
+
−    IFS="${IFS-$defaultIFS}"
+
−
+
−    oIFS=$IFS
+
−    # Some sh's can't handle IFS=/ for some reason.
+
−    IFS='%'
+
−    set x `echo "$dstdir" | sed -e 's@/@%@g' -e 's@^%@/@'`
+
−    shift
+
−    IFS=$oIFS
+
−
+
−    pathcomp=
+
−
+
−    while test $# -ne 0 ; do
+
−      pathcomp=$pathcomp$1
+
−      shift
+
−      if test ! -d "$pathcomp"; then
+
−        $mkdirprog "$pathcomp"
+
−	# mkdir can fail with a `File exist' error in case several
+
−	# install-sh are creating the directory concurrently.  This
+
−	# is OK.
+
−	test -d "$pathcomp" || exit
+
−      fi
+
−      pathcomp=$pathcomp/
+
−    done
+
−  fi
+
−
+
−  if test -n "$dir_arg"; then
+
−    $doit $mkdircmd "$dst" \
+
−      && { test -z "$chowncmd" || $doit $chowncmd "$dst"; } \
+
−      && { test -z "$chgrpcmd" || $doit $chgrpcmd "$dst"; } \
+
−      && { test -z "$stripcmd" || $doit $stripcmd "$dst"; } \
+
−      && { test -z "$chmodcmd" || $doit $chmodcmd "$dst"; }
+
−
+
−  else
+
−    dstfile=`basename "$dst"`
+
−
+
−    # Make a couple of temp file names in the proper directory.
+
−    dsttmp=$dstdir/_inst.$$_
+
−    rmtmp=$dstdir/_rm.$$_
+
−
+
−    # Trap to clean up those temp files at exit.
+
−    trap 'ret=$?; rm -f "$dsttmp" "$rmtmp" && exit $ret' 0
+
−    trap '(exit $?); exit' 1 2 13 15
+
−
+
−    # Copy the file name to the temp name.
+
−    $doit $cpprog "$src" "$dsttmp" &&
+
−
+
−    # and set any options; do chmod last to preserve setuid bits.
+
−    #
+
−    # If any of these fail, we abort the whole thing.  If we want to
+
−    # ignore errors from any of these, just make sure not to ignore
+
−    # errors from the above "$doit $cpprog $src $dsttmp" command.
+
−    #
+
−    { test -z "$chowncmd" || $doit $chowncmd "$dsttmp"; } \
+
−      && { test -z "$chgrpcmd" || $doit $chgrpcmd "$dsttmp"; } \
+
−      && { test -z "$stripcmd" || $doit $stripcmd "$dsttmp"; } \
+
−      && { test -z "$chmodcmd" || $doit $chmodcmd "$dsttmp"; } &&
+
−
+
−    # Now rename the file to the real destination.
+
−    { $doit $mvcmd -f "$dsttmp" "$dstdir/$dstfile" 2>/dev/null \
+
−      || {
+
−	   # The rename failed, perhaps because mv can't rename something else
+
−	   # to itself, or perhaps because mv is so ancient that it does not
+
−	   # support -f.
+
−
+
−	   # Now remove or move aside any old file at destination location.
+
−	   # We try this two ways since rm can't unlink itself on some
+
−	   # systems and the destination file might be busy for other
+
−	   # reasons.  In this case, the final cleanup might fail but the new
+
−	   # file should still install successfully.
+
−	   {
+
−	     if test -f "$dstdir/$dstfile"; then
+
−	       $doit $rmcmd -f "$dstdir/$dstfile" 2>/dev/null \
+
−	       || $doit $mvcmd -f "$dstdir/$dstfile" "$rmtmp" 2>/dev/null \
+
−	       || {
+
−		 echo "$0: cannot unlink or rename $dstdir/$dstfile" >&2
+
−		 (exit 1); exit 1
+
−	       }
+
−	     else
+
−	       :
+
−	     fi
+
−	   } &&
+
−
+
−	   # Now rename the file to the real destination.
+
−	   $doit $mvcmd "$dsttmp" "$dstdir/$dstfile"
+
−	 }
+
−    }
+
−  fi || { (exit 1); exit 1; }
+
−done
+
−
+
−# The final little trick to "correctly" pass the exit status to the exit trap.
+
−{
+
−  (exit 0); exit 0
+
−}
+
−
+
−# Local variables:
+
−# eval: (add-hook 'write-file-hooks 'time-stamp)
+
−# time-stamp-start: "scriptversion="
+
−# time-stamp-format: "%:y-%02m-%02d.%02H"
+
−# time-stamp-end: "$"
+
−# End: