diff lighttpd/lighttpd.conf @ 26:b003235abe75

Add lighttpd configuration files.
author John "Elwin" Edwards
date Mon, 28 Oct 2013 20:33:23 -0700
parents
children e8f3b7994d88
line wrap: on
line diff
--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/lighttpd/lighttpd.conf	Mon Oct 28 20:33:23 2013 -0700
@@ -0,0 +1,453 @@
+#######################################################################
+##
+## /etc/lighttpd/lighttpd.conf
+##
+## check /etc/lighttpd/conf.d/*.conf for the configuration of modules.
+##
+#######################################################################
+
+#######################################################################
+##
+## Some Variable definition which will make chrooting easier.
+##
+## if you add a variable here. Add the corresponding variable in the
+## chroot example aswell.
+##
+var.log_root    = "/var/log/lighttpd"
+var.server_root = "/var/www"
+var.state_dir   = "/var/run"
+var.home_dir    = "/var/lib/lighttpd"
+var.conf_dir    = "/etc/lighttpd"
+
+## 
+## run the server chrooted.
+## 
+## This requires root permissions during startup.
+##
+## If you run Chrooted set the the variables to directories relative to
+## the chroot dir.
+##
+## example chroot configuration:
+## 
+#var.log_root    = "/logs"
+#var.server_root = "/"
+#var.state_dir   = "/run"
+#var.home_dir    = "/lib/lighttpd"
+#var.vhosts_dir  = "/vhosts"
+#var.conf_dir    = "/etc"
+#
+#server.chroot   = "/srv/www"
+
+##
+## Some additional variables to make the configuration easier
+##
+
+##
+## Base directory for all virtual hosts
+##
+## used in:
+## conf.d/evhost.conf
+## conf.d/simple_vhost.conf
+## vhosts.d/vhosts.template
+##
+var.vhosts_dir  = server_root + "/vhosts"
+
+##
+## Cache for mod_compress
+##
+## used in:
+## conf.d/compress.conf
+##
+var.cache_dir   = "/var/cache/lighttpd"
+
+##
+## Base directory for sockets.
+##
+## used in:
+## conf.d/fastcgi.conf
+## conf.d/scgi.conf
+##
+var.socket_dir  = home_dir + "/sockets"
+
+##
+#######################################################################
+
+#######################################################################
+##
+## Load the modules.
+include "modules.conf"
+
+##
+#######################################################################
+
+#######################################################################
+##
+##  Basic Configuration
+## ---------------------
+##
+server.port = 80
+
+##
+## Use IPv6?
+##
+server.use-ipv6 = "enable"
+
+##
+## bind to a specific IP
+##
+#server.bind = "localhost"
+
+##
+## Run as a different username/groupname.
+## This requires root permissions during startup. 
+##
+server.username  = "lighttpd"
+server.groupname = "lighttpd"
+
+## 
+## enable core files.
+##
+#server.core-files = "disable"
+
+##
+## Document root
+##
+server.document-root = server_root + "/lighttpd"
+
+##
+## The value for the "Server:" response field.
+##
+## It would be nice to keep it at "lighttpd".
+##
+#server.tag = "lighttpd"
+
+##
+## store a pid file
+##
+server.pid-file = state_dir + "/lighttpd.pid"
+
+##
+#######################################################################
+
+#######################################################################
+##
+##  Logging Options
+## ------------------
+##
+## all logging options can be overwritten per vhost.
+##
+## Path to the error log file
+##
+server.errorlog             = log_root + "/error.log"
+
+##
+## If you want to log to syslog you have to unset the 
+## server.errorlog setting and uncomment the next line.
+##
+#server.errorlog-use-syslog = "enable"
+
+##
+## Access log config
+## 
+include "conf.d/access_log.conf"
+
+##
+## The debug options are moved into their own file.
+## see conf.d/debug.conf for various options for request debugging.
+##
+include "conf.d/debug.conf"
+
+##
+#######################################################################
+
+#######################################################################
+##
+##  Tuning/Performance
+## --------------------
+##
+## corresponding documentation:
+## http://www.lighttpd.net/documentation/performance.html
+##
+## set the event-handler (read the performance section in the manual)
+##
+## possible options on linux are:
+##
+## select
+## poll
+## linux-sysepoll
+##
+## linux-sysepoll is recommended on kernel 2.6.
+##
+server.event-handler = "linux-sysepoll"
+
+##
+## The basic network interface for all platforms at the syscalls read()
+## and write(). Every modern OS provides its own syscall to help network
+## servers transfer files as fast as possible 
+##
+## linux-sendfile - is recommended for small files.
+## writev         - is recommended for sending many large files
+##
+server.network-backend = "linux-sendfile"
+
+##
+## As lighttpd is a single-threaded server, its main resource limit is
+## the number of file descriptors, which is set to 1024 by default (on
+## most systems).
+##
+## If you are running a high-traffic site you might want to increase this
+## limit by setting server.max-fds.
+##
+## Changing this setting requires root permissions on startup. see
+## server.username/server.groupname.
+##
+## By default lighttpd would not change the operation system default.
+## But setting it to 2048 is a better default for busy servers.
+##
+## With SELinux enabled, this is denied by default and needs to be allowed
+## by running the following once : setsebool -P httpd_setrlimit on
+#server.max-fds = 2048
+
+##
+## Stat() call caching.
+##
+## lighttpd can utilize FAM/Gamin to cache stat call.
+##
+## possible values are:
+## disable, simple or fam.
+##
+server.stat-cache-engine = "simple"
+
+##
+## Fine tuning for the request handling
+##
+## max-connections == max-fds/2 (maybe /3)
+## means the other file handles are used for fastcgi/files
+##
+server.max-connections = 1024
+
+##
+## How many seconds to keep a keep-alive connection open,
+## until we consider it idle. 
+##
+## Default: 5
+##
+#server.max-keep-alive-idle = 5
+
+##
+## How many keep-alive requests until closing the connection.
+##
+## Default: 16
+##
+#server.max-keep-alive-requests = 16
+
+##
+## Maximum size of a request in kilobytes.
+## By default it is unlimited (0).
+##
+## Uploads to your server cant be larger than this value.
+##
+#server.max-request-size = 0
+
+##
+## Time to read from a socket before we consider it idle.
+##
+## Default: 60
+##
+#server.max-read-idle = 60
+
+##
+## Time to write to a socket before we consider it idle.
+##
+## Default: 360
+##
+#server.max-write-idle = 360
+
+##
+##  Traffic Shaping 
+## -----------------
+##
+## see /usr/share/doc/lighttpd/traffic-shaping.txt
+##
+## Values are in kilobyte per second.
+##
+## Keep in mind that a limit below 32kB/s might actually limit the
+## traffic to 32kB/s. This is caused by the size of the TCP send
+## buffer. 
+##
+## per server:
+##
+#server.kbytes-per-second = 128
+
+##
+## per connection:
+##
+#connection.kbytes-per-second = 32
+
+##
+#######################################################################
+
+#######################################################################
+##
+##  Filename/File handling
+## ------------------------
+
+##
+## files to check for if .../ is requested
+## index-file.names            = ( "index.php", "index.rb", "index.html",
+##                                 "index.htm", "default.htm" )
+##
+#index-file.names += (
+#  "index.xhtml", "index.html", "index.htm", "default.htm", "index.php"
+#)
+index-file.names += (
+  "index.xhtml", "index.html", "index.htm", "default.htm", "index.php",
+  "index.cgi"
+)
+
+##
+## deny access the file-extensions
+##
+## ~    is for backupfiles from vi, emacs, joe, ...
+## .inc is often used for code includes which should in general not be part
+##      of the document-root
+url.access-deny             = ( "~", ".inc" )
+
+##
+## disable range requests for pdf files
+## workaround for a bug in the Acrobat Reader plugin.
+##
+$HTTP["url"] =~ "\.pdf$" {
+  server.range-requests = "disable"
+}
+
+##
+## url handling modules (rewrite, redirect)
+##
+#url.rewrite                = ( "^/$"             => "/server-status" )
+#url.redirect               = ( "^/wishlist/(.+)" => "http://www.example.com/$1" )
+
+##
+## both rewrite/redirect support back reference to regex conditional using %n
+##
+#$HTTP["host"] =~ "^www\.(.*)" {
+#  url.redirect            = ( "^/(.*)" => "http://%1/$1" )
+#}
+
+##
+## which extensions should not be handle via static-file transfer
+##
+## .php, .pl, .fcgi are most often handled by mod_fastcgi or mod_cgi
+##
+#static-file.exclude-extensions = ( ".php", ".pl", ".fcgi", ".scgi" )
+static-file.exclude-extensions = ( ".php", ".pl", ".fcgi", ".cgi", ".py", ".scgi" )
+
+##
+## error-handler for status 404
+##
+#server.error-handler-404   = "/error-handler.html"
+#server.error-handler-404   = "/error-handler.php"
+server.error-handler-404   = "404.html"
+
+##
+## Format: <errorfile-prefix><status-code>.html
+## -> ..../status-404.html for 'File not found'
+##
+#server.errorfile-prefix    = "/srv/www/htdocs/errors/status-"
+
+##
+## mimetype mapping
+##
+include "conf.d/mime.conf"
+
+##
+## directory listing configuration
+##
+include "conf.d/dirlisting.conf"
+
+##
+## Should lighttpd follow symlinks?
+## 
+server.follow-symlink = "enable"
+
+##
+## force all filenames to be lowercase?
+##
+#server.force-lowercase-filenames = "disable"
+
+##
+## defaults to /var/tmp as we assume it is a local harddisk
+##
+server.upload-dirs = ( "/var/tmp" )
+
+##
+#######################################################################
+
+
+#######################################################################
+##
+##  SSL Support
+## ------------- 
+##
+## To enable SSL for the whole server you have to provide a valid
+## certificate and have to enable the SSL engine.::
+##
+##   ssl.engine = "enable"
+##   ssl.pemfile = "/path/to/server.pem"
+##
+## The HTTPS protocol does not allow you to use name-based virtual
+## hosting with SSL. If you want to run multiple SSL servers with
+## one lighttpd instance you must use IP-based virtual hosting: ::
+##
+##   $SERVER["socket"] == "10.0.0.1:443" {
+##     ssl.engine                  = "enable"
+##     ssl.pemfile                 = "/etc/ssl/private/www.example.com.pem"
+##     #
+##     # Mitigate BEAST attack:
+##     #
+##     # A stricter base cipher suite. For details see:
+##     # http://blog.ivanristic.com/2011/10/mitigating-the-beast-attack-on-tls.html
+##     #
+##     ssl.cipher-list             = "ECDHE-RSA-AES256-SHA384:AES256-SHA256:RC4-SHA:RC4:HIGH:!MD5:!aNULL:!EDH:!AESGCM"
+##     #
+##     # Make the server prefer the order of the server side cipher suite instead of the client suite.
+##     # This is necessary to mitigate the BEAST attack (unless you disable all non RC4 algorithms).
+##     # This option is enabled by default, but only used if ssl.cipher-list is set.
+##     #
+##     # ssl.honor-cipher-order = "enable"
+##     #
+##     # Mitigate CVE-2009-3555 by disabling client triggered renegotation
+##     # This is enabled by default.
+##     #
+##     # ssl.disable-client-renegotiation = "enable"
+##     #
+##     server.name                 = "www.example.com"
+##
+##     server.document-root        = "/srv/www/vhosts/example.com/www/"
+##   }
+##
+
+## If you have a .crt and a .key file, cat them together into a
+## single PEM file:
+## $ cat /etc/ssl/private/lighttpd.key /etc/ssl/certs/lighttpd.crt \
+##   > /etc/ssl/private/lighttpd.pem
+##
+#ssl.pemfile = "/etc/ssl/private/lighttpd.pem"
+
+##
+## optionally pass the CA certificate here.
+##
+##
+#ssl.ca-file = ""
+
+##
+#######################################################################
+
+#######################################################################
+##
+## custom includes like vhosts.
+##
+#include "conf.d/config.conf"
+#include_shell "cat /etc/lighttpd/vhosts.d/*.conf"
+##
+#######################################################################