Mercurial > hg > rlgallery-misc

comparison lighttpd/lighttpd.conf @ 26:b003235abe75

Find changesets by keywords (author, files, the commit message), revision number or hash, or revset expression.
Add lighttpd configuration files.
author John "Elwin" Edwards
date Mon, 28 Oct 2013 20:33:23 -0700
parents
children e8f3b7994d88
comparison
equal deleted inserted replaced
25:dd72d2dd923f 26:b003235abe75
1 #######################################################################
2 ##
3 ## /etc/lighttpd/lighttpd.conf
4 ##
5 ## check /etc/lighttpd/conf.d/*.conf for the configuration of modules.
6 ##
7 #######################################################################
8
9 #######################################################################
10 ##
11 ## Some Variable definition which will make chrooting easier.
12 ##
13 ## if you add a variable here. Add the corresponding variable in the
14 ## chroot example aswell.
15 ##
16 var.log_root = "/var/log/lighttpd"
17 var.server_root = "/var/www"
18 var.state_dir = "/var/run"
19 var.home_dir = "/var/lib/lighttpd"
20 var.conf_dir = "/etc/lighttpd"
21
22 ##
23 ## run the server chrooted.
24 ##
25 ## This requires root permissions during startup.
26 ##
27 ## If you run Chrooted set the the variables to directories relative to
28 ## the chroot dir.
29 ##
30 ## example chroot configuration:
31 ##
32 #var.log_root = "/logs"
33 #var.server_root = "/"
34 #var.state_dir = "/run"
35 #var.home_dir = "/lib/lighttpd"
36 #var.vhosts_dir = "/vhosts"
37 #var.conf_dir = "/etc"
38 #
39 #server.chroot = "/srv/www"
40
41 ##
42 ## Some additional variables to make the configuration easier
43 ##
44
45 ##
46 ## Base directory for all virtual hosts
47 ##
48 ## used in:
49 ## conf.d/evhost.conf
50 ## conf.d/simple_vhost.conf
51 ## vhosts.d/vhosts.template
52 ##
53 var.vhosts_dir = server_root + "/vhosts"
54
55 ##
56 ## Cache for mod_compress
57 ##
58 ## used in:
59 ## conf.d/compress.conf
60 ##
61 var.cache_dir = "/var/cache/lighttpd"
62
63 ##
64 ## Base directory for sockets.
65 ##
66 ## used in:
67 ## conf.d/fastcgi.conf
68 ## conf.d/scgi.conf
69 ##
70 var.socket_dir = home_dir + "/sockets"
71
72 ##
73 #######################################################################
74
75 #######################################################################
76 ##
77 ## Load the modules.
78 include "modules.conf"
79
80 ##
81 #######################################################################
82
83 #######################################################################
84 ##
85 ## Basic Configuration
86 ## ---------------------
87 ##
88 server.port = 80
89
90 ##
91 ## Use IPv6?
92 ##
93 server.use-ipv6 = "enable"
94
95 ##
96 ## bind to a specific IP
97 ##
98 #server.bind = "localhost"
99
100 ##
101 ## Run as a different username/groupname.
102 ## This requires root permissions during startup.
103 ##
104 server.username = "lighttpd"
105 server.groupname = "lighttpd"
106
107 ##
108 ## enable core files.
109 ##
110 #server.core-files = "disable"
111
112 ##
113 ## Document root
114 ##
115 server.document-root = server_root + "/lighttpd"
116
117 ##
118 ## The value for the "Server:" response field.
119 ##
120 ## It would be nice to keep it at "lighttpd".
121 ##
122 #server.tag = "lighttpd"
123
124 ##
125 ## store a pid file
126 ##
127 server.pid-file = state_dir + "/lighttpd.pid"
128
129 ##
130 #######################################################################
131
132 #######################################################################
133 ##
134 ## Logging Options
135 ## ------------------
136 ##
137 ## all logging options can be overwritten per vhost.
138 ##
139 ## Path to the error log file
140 ##
141 server.errorlog = log_root + "/error.log"
142
143 ##
144 ## If you want to log to syslog you have to unset the
145 ## server.errorlog setting and uncomment the next line.
146 ##
147 #server.errorlog-use-syslog = "enable"
148
149 ##
150 ## Access log config
151 ##
152 include "conf.d/access_log.conf"
153
154 ##
155 ## The debug options are moved into their own file.
156 ## see conf.d/debug.conf for various options for request debugging.
157 ##
158 include "conf.d/debug.conf"
159
160 ##
161 #######################################################################
162
163 #######################################################################
164 ##
165 ## Tuning/Performance
166 ## --------------------
167 ##
168 ## corresponding documentation:
169 ## http://www.lighttpd.net/documentation/performance.html
170 ##
171 ## set the event-handler (read the performance section in the manual)
172 ##
173 ## possible options on linux are:
174 ##
175 ## select
176 ## poll
177 ## linux-sysepoll
178 ##
179 ## linux-sysepoll is recommended on kernel 2.6.
180 ##
181 server.event-handler = "linux-sysepoll"
182
183 ##
184 ## The basic network interface for all platforms at the syscalls read()
185 ## and write(). Every modern OS provides its own syscall to help network
186 ## servers transfer files as fast as possible
187 ##
188 ## linux-sendfile - is recommended for small files.
189 ## writev - is recommended for sending many large files
190 ##
191 server.network-backend = "linux-sendfile"
192
193 ##
194 ## As lighttpd is a single-threaded server, its main resource limit is
195 ## the number of file descriptors, which is set to 1024 by default (on
196 ## most systems).
197 ##
198 ## If you are running a high-traffic site you might want to increase this
199 ## limit by setting server.max-fds.
200 ##
201 ## Changing this setting requires root permissions on startup. see
202 ## server.username/server.groupname.
203 ##
204 ## By default lighttpd would not change the operation system default.
205 ## But setting it to 2048 is a better default for busy servers.
206 ##
207 ## With SELinux enabled, this is denied by default and needs to be allowed
208 ## by running the following once : setsebool -P httpd_setrlimit on
209 #server.max-fds = 2048
210
211 ##
212 ## Stat() call caching.
213 ##
214 ## lighttpd can utilize FAM/Gamin to cache stat call.
215 ##
216 ## possible values are:
217 ## disable, simple or fam.
218 ##
219 server.stat-cache-engine = "simple"
220
221 ##
222 ## Fine tuning for the request handling
223 ##
224 ## max-connections == max-fds/2 (maybe /3)
225 ## means the other file handles are used for fastcgi/files
226 ##
227 server.max-connections = 1024
228
229 ##
230 ## How many seconds to keep a keep-alive connection open,
231 ## until we consider it idle.
232 ##
233 ## Default: 5
234 ##
235 #server.max-keep-alive-idle = 5
236
237 ##
238 ## How many keep-alive requests until closing the connection.
239 ##
240 ## Default: 16
241 ##
242 #server.max-keep-alive-requests = 16
243
244 ##
245 ## Maximum size of a request in kilobytes.
246 ## By default it is unlimited (0).
247 ##
248 ## Uploads to your server cant be larger than this value.
249 ##
250 #server.max-request-size = 0
251
252 ##
253 ## Time to read from a socket before we consider it idle.
254 ##
255 ## Default: 60
256 ##
257 #server.max-read-idle = 60
258
259 ##
260 ## Time to write to a socket before we consider it idle.
261 ##
262 ## Default: 360
263 ##
264 #server.max-write-idle = 360
265
266 ##
267 ## Traffic Shaping
268 ## -----------------
269 ##
270 ## see /usr/share/doc/lighttpd/traffic-shaping.txt
271 ##
272 ## Values are in kilobyte per second.
273 ##
274 ## Keep in mind that a limit below 32kB/s might actually limit the
275 ## traffic to 32kB/s. This is caused by the size of the TCP send
276 ## buffer.
277 ##
278 ## per server:
279 ##
280 #server.kbytes-per-second = 128
281
282 ##
283 ## per connection:
284 ##
285 #connection.kbytes-per-second = 32
286
287 ##
288 #######################################################################
289
290 #######################################################################
291 ##
292 ## Filename/File handling
293 ## ------------------------
294
295 ##
296 ## files to check for if .../ is requested
297 ## index-file.names = ( "index.php", "index.rb", "index.html",
298 ## "index.htm", "default.htm" )
299 ##
300 #index-file.names += (
301 # "index.xhtml", "index.html", "index.htm", "default.htm", "index.php"
302 #)
303 index-file.names += (
304 "index.xhtml", "index.html", "index.htm", "default.htm", "index.php",
305 "index.cgi"
306 )
307
308 ##
309 ## deny access the file-extensions
310 ##
311 ## ~ is for backupfiles from vi, emacs, joe, ...
312 ## .inc is often used for code includes which should in general not be part
313 ## of the document-root
314 url.access-deny = ( "~", ".inc" )
315
316 ##
317 ## disable range requests for pdf files
318 ## workaround for a bug in the Acrobat Reader plugin.
319 ##
320 $HTTP["url"] =~ "\.pdf$" {
321 server.range-requests = "disable"
322 }
323
324 ##
325 ## url handling modules (rewrite, redirect)
326 ##
327 #url.rewrite = ( "^/$" => "/server-status" )
328 #url.redirect = ( "^/wishlist/(.+)" => "http://www.example.com/$1" )
329
330 ##
331 ## both rewrite/redirect support back reference to regex conditional using %n
332 ##
333 #$HTTP["host"] =~ "^www\.(.*)" {
334 # url.redirect = ( "^/(.*)" => "http://%1/$1" )
335 #}
336
337 ##
338 ## which extensions should not be handle via static-file transfer
339 ##
340 ## .php, .pl, .fcgi are most often handled by mod_fastcgi or mod_cgi
341 ##
342 #static-file.exclude-extensions = ( ".php", ".pl", ".fcgi", ".scgi" )
343 static-file.exclude-extensions = ( ".php", ".pl", ".fcgi", ".cgi", ".py", ".scgi" )
344
345 ##
346 ## error-handler for status 404
347 ##
348 #server.error-handler-404 = "/error-handler.html"
349 #server.error-handler-404 = "/error-handler.php"
350 server.error-handler-404 = "404.html"
351
352 ##
353 ## Format: <errorfile-prefix><status-code>.html
354 ## -> ..../status-404.html for 'File not found'
355 ##
356 #server.errorfile-prefix = "/srv/www/htdocs/errors/status-"
357
358 ##
359 ## mimetype mapping
360 ##
361 include "conf.d/mime.conf"
362
363 ##
364 ## directory listing configuration
365 ##
366 include "conf.d/dirlisting.conf"
367
368 ##
369 ## Should lighttpd follow symlinks?
370 ##
371 server.follow-symlink = "enable"
372
373 ##
374 ## force all filenames to be lowercase?
375 ##
376 #server.force-lowercase-filenames = "disable"
377
378 ##